Ls timing cover bolt torque

Ls timing cover bolt torque DEFAULT
Engine Parts/BoltsTorque:Camshaft Retainer Bolts18 lb ftCamshaft Sensor Bolt18 lb ftCamshaft Sprocket Bolts26 lb ftConnecting Rod Bolts - First Design (First Pass)15 lb ftConnecting Rod Bolts - First Design (Final Pass)60 degreesConnecting Rod Bolts - Second Design (First Pass)15 lb ftConnecting Rod Bolts - Second Design (Final Pass)75 degreesCrankshaft Balancer Bolt (Installation Pass-to Ensure the Balancer is Completely Installed)240 lb ftCrankshaft Balancer Bolt (First Pass-Install a NEW Bolt After the Installation Pass and Tighten as Described in the First and Final Passes)37 lb ftCrankshaft Balancer Bolt (Final Pass)140 degreesCrankshaft Bearing Cap Bolts (Inner Bolts-First Pass in Sequence)15 lb ftCrankshaft Bearing Cap Bolts (Inner Bolts-Final Pass in Sequence)80 degreesCrankshaft Bearing Cap Side Bolts18 lb ftCrankshaft Bearing Cap Studs (Outer Studs-First Pass in Sequence)15 lb ftCrankshaft Bearing Cap Studs (Outer Studs-Final Pass in Sequence)53 degreesCrankshaft Position Sensor Bolt18 lb ftCylinder Head Bolts (First Pass all M11 Bolts in Sequence)22 lb ftCylinder Head Bolts (Second Pass all M11 Bolts in Sequence)90 degreesCylinder Head Bolts (Final Pass all M11 Bolts in Sequence-Excluding the Medium Length Bolts at the Front and Rear of Each Cylinder Head)90 degreesCylinder Head Bolts (Final Pass M11 Medium Length Bolts at the Front and Rear of Each Cylinder Head in Sequence)50 degreesCylinder Head Bolts (M8 Inner Bolts in Sequence)22 lb ftEngine Flywheel Bolts74 lb ftEngine Flywheel-to-Torque Converter Bolts44 lb ftEngine Front Cover Bolts18 lb ftEngine Rear Cover Bolts18 lb ftEngine Valley Cover Bolts18 lb ftExhaust Manifold Bolts18 lb ftFuel Injection Fuel Rail Bolts89 lb inIntake Manifold Bolts (in sequence)89 lb inKnock Sensors15 lb ftOil Pan M8 Bolts (Oil Pan-to-Engine Block and Oil Pan-to-Front Cover)18 lb ftOil Pan M6 Bolts (Oil Pan-to-Rear Cover)106 lb inValve Rocker Arm Bolts22 lb ftValve Rocker Arm Cover Bolts106 lb inWater Inlet Housing Bolts11 lb ftWater Pump Bolts (First Pass)11 lb ftWater Pump Bolts (Final Pass)22 lb ftWater Pump Cover Bolts11 lb ft
Sours: https://butler-ls.com/n-12562-ls-torque-specs-sequence.html
PARTSPECAccessory Drive Belt Tensioner Bolt - Lower16 lb ftAccessory Drive Belt Tensioner Pulley Bolt43 lb ftAutomatic Transmission Flex Plate Bolts (1)•First Pass11 lb ft•Second Pass22 lb ft•Final Pass45 degreesFlywheel Bolts (1)•First Pass11 lb ft•Second Pass22 lb ft•Final Pass45 degreesCamshaft Position (CMP) Actuator Magnet Bolts89 lb inCamshaft Position (CMP) Actuator Solenoid Valve (1)•First Pass48 lb ft•Final Pass90 degreesCamshaft Position (CMP) Sensor Bolt18 lb ftCamshaft Position (CMP) Sensor Wire Harness Bolt18 lb ftCamshaft Retainer Bolts – TORX Head Bolts11 lb ftConnecting Rod Bolts (1)•First Pass15 lb ft•Final Pass85 degreesCoolant Temperature Sensor15 lb ftCrankshaft Balancer Bolt – Installation Pass with Used Bolt – to Ensure the Balancer is Completely Installed243 lb ftCrankshaft Balancer Bolt New Bolt with Flanged Head (1)•First Pass111 lb ft•Second PassLoosen 360 degrees•Third Pass59 lb ft•Final Pass125 degreesCrankshaft Balancer Bolt New Bolt with Retained Rotating Washer (1)•First Pass111 lb ft•Second PassLoosen 360 degrees•Third Pass59 lb ft•Final Pass200 degreesCrankshaft Bearing Cap Bolts (1)•Inner Bearing Cap Bolts - First Pass in Sequence1•First Pass15 lb ft•Inner Bearing Cap Bolts - Final Pass in Sequence1•Final Pass110 degrees•Outer Bearing Cap Bolts - First Pass in Sequence•First Pass15 lb ft•Outer Bearing Cap Bolts - Final Pass in Sequence•Final Pass•Bearing Cap Side Bolts – First Pass in Sequence•First Pass18 lb ft•Bearing Cap Side Bolts – Final Pass in Sequence•Final Pass60 degreesCrankshaft Oil Deflector Bolts89 lb inCrankshaft Position (CKP) Sensor Bolt18 lb ftCrankshaft Rear Oil Seal Housing Bolts18 lb ft•Cylinder Head Bolts - Internal Hex – LH Cylinder Head forwardmost fastener - First Pass in Sequence•First Pass59 lb ft•Cylinder Head Bolts – Internal Hex – LH Cylinder Head forwardmost fastener - Second Pass in Sequence•Second Pass90 degrees•Cylinder Head Bolts - Internal Hex – LH Cylinder Head forwardmost fastener - Final Pass in Sequence•Final Pass40 degrees•Cylinder Head Bolts – Standard Hex - First Pass in Sequence•First Pass59 lb ft•Cylinder Head Bolts – Standard Hex - Second Pass in Sequence•Second Pass90 degrees•Cylinder Head Bolts – Standard Hex - Final Pass in Sequence•Final Pass60 degreesEngine Block Coolant Drain Hole Plug44 lb ftEngine Block Coolant Heater37 lb ftEngine Block Oil Gallery Plugs – Front18 lb ftEngine Block Oil Gallery Plugs – Rear22 lb ftEngine Oil Cooler Adapter to Oil Pan Bolt (M6)89 lb inEngine Oil Cooler Adapter to Oil Pan Bolt (M8)18 lb ftEngine Oil Cooler Coolant Fitting26 lb ftEngine Oil Cooler Core Bolt18 lb ftEngine Wiring Harness Bolt (Rear Engine Channel)89 lb inEngine Wiring Harness Jumper Bracket Bolt18 lb ftExhaust Manifold Bolts•Exhaust Manifold Bolts– If installing on existing cylinder head17 lb ft•Exhaust Manifold Bolts– If installing on NEW cylinder head20 lb ftExhaust Manifold Heat Shield Bolts89 lb inFront Cover Bolts18 lb ftFuel Pump Bolts18 lb ftFuel Feed Intermediate Pipe Fittings (1)22 lb ftFuel Feed Pipe Bolt89 lb inFuel Injection Fuel Rail Bolts18 lb ftFuel Injection Fuel Rail Crossover Pipe Bolt89 lb inGenerator Bracket Bolts37 lb ftIgnition Coil Bracket-to-Valve Rocker Arm Cover Bolts89 lb inIntake Manifold Bolts•First Pass in Sequence•First Pass44 lb in•Final Pass in Sequence•Final Pass89 lb inIntake Manifold Cover Studs40 lb inIntake Manifold Cover Bolts40 lb inKnock Sensor Bolts18 lb ftKnock Sensor Heat Shield Bolt18 lb ftOil Filter3/4 to 1 full turn after gasket makes contact with the sealing surfaceOil Filter Fitting41 lb ftOil Level Indicator Tube Bolt89 lb inOil Pan Cover Bolts89 lb inOil Pan Drain Plug18 lb ftOil Pan Bolts – Oil Pan-to-Rear Housing106 lb inOil Pan Bolts – Oil Pan-to-Rear Housing106 lb inOil Pan Bolts – Oil Pan-to-Engine Block and Oil Pan-to-Front Cover18 lb ftOil Pressure Sensor26 lb ftOil Level Sensor Bolts89 lb inOil Pump Screen Bolts89 lb inOil Pump-to-Engine Block Bolts18 lb ftPositive Crankcase Ventilation Valve53 lb inSpark Plugs15 lb ftThrottle Body Bolts89 lb inMap Sensor Bolt – Intake Manifold40 lb inEvap Purge Valve Bolt89 lb inTiming Chain Tensioner Bolts18 lb ftValve Lifter Guide Bolts106 lb inValve LIfter Follower Guide Bolt106 lb inValve Lifter Oil Manifold Bolts•First Pass in Sequence11 lb ft•Final Pass in Sequence22 lb ftValve Lifter Oil Manifold Filter Plug22 lb ftValve Rocker Arm Bolts22 lb ftValve Rocker Arm Cover Bolts - In Sequence89 lb inWater Outlet Housing Bolts89 lb inWater Pump Impeller Bolts89 lb inEngine Coolant Manifold Bolts18 lb ftStarter Heat Shield Bolt - Side89 lb inStarter Heat Shield Bolt - Rear18 lb ft
Sours: https://ratedrmotorsports.com/blogs/lt-torque-specs/lt-torque-specs
  1. Costco memorial day hours
  2. 2005 tahoe 3rd row seats
  3. Lots for sale ontario ca

FAQ : LS1 Torque Specifications

Whenever you are looking to build your own LS swap or frankenstein LS heads and block combination, you will need the factory LS1 Torque Specifications to assemble your block correctly.

240sxls1

Cylinder Head Bolts :

  • 11mm x 20.0 x 155.5mm bolts: 22 ft-lb, plus 76 degrees
  • 11mm x 20.0 x 101.0 mm bolts: 22 ft-lb, plus 76 degrees, plus 34 degrees
  • 8mm x 1.25 x 46mm bolts: 22 ft-lb

ARP Cylinder Head Studs

  • ARP cylinder head stud 7/16″ nuts: 80 ft-lb w/ARP moly
  • ARP 8mm upper studs: 22 ft-lb w/ARP moly

Connecting Rod Bolts

  • OE rod bolts (First Design): 15 ft-lb 1st sequence,plus 65 degrees
  • OE rod bolts (Second Design): 15 ft-lb 1st sequence, plus 75 degrees

Main Cap Bolt Torque Values

  • Inner main cap bolts: 15 ft-lb 1st sequence, 80 degrees
  • Outer main cap stud nuts: 15 ft-lb 1st sequence, 53 degrees
  • Main cap side bolts: 18 ft-lb

Intake Manifold

  • OE Plastic Injection Manifold : 44 in-lb in first sequence, then 89 in-lb
  • Aftermarket Intake Manifold : 44 in-lb

Don’t forget our other LS1 How To Guides

Exhaust Manifold/Header to Heads

  • Exhaust manifold bolts first pass: 11 ft-lb
  • Exhaust manifold bolts final pass: 18 ft-lb

lsbore

Miscellaneous OE Torque Specs

  • Camshaft retainer plate bolts: 18 ft-lb
  • Camshaft gear bolts: 26 ft-lb
  • Flywheel bolts: 15ft-lbs, 37 ft lbs, 74 ft lbs
  • OE timing chain damper bolts: 18 ft-lb
  • Oil pump mounting bolts: 18 ft-lb
  • Oil pump cover bolts: 106 in-lb
  • Oil pump relief valve plug: 106 in-lb
  • Oil pump screen nuts: 18 ft-lb
  • Oil pump to screen bolt: 106 in-lb
  • Oil pan bolts 8mm (pan to block and pan to front cover): 18 ft-lb
  • Oil pan bolts 6mm ( to rear cover ) : 106 in-lb
  • Oil filter fitting: 40 ft-lb
  • Oil level sensor: 115 in-lb
  • Oil pan baffle bolts: 106 in-lb
  • Oil pan closeout cover bolts: 106 in-lb
  • Oil pan cover bolts: 106 in-lb
  • Oil pan drain plug: 18 ft-lb
  • Oil pressure sensor: 15 ft-lb
  • Knock sensors: 15 ft-lb
  • Front cover bolts: 18 ft-lb
  • Rear cover bolts: 18 ft-lb
  • Block valley cover bolts: 18 ft-lb
  • Water pump bolt: 11 ft-lb (1st pass),
  • 22 ft-lb (2nd pass)
  • Crankshaft balancer bolt 24 ft-lb
  • Crankshaft oil deflector nuts: 18 ft-lb
  • Crankshaft position sensor bolt: 18 ft-lb
  • Coolant temperature sensor: 15 ft-lb
  • Cylinder head coolant plug: 15 ft-lb
  • Cylinder head core hole plug: 15 ft-lb
  • Block coolant drain plugs: 44 ft-lb
  • Coolant air bleed pipe bolts: 106 in-lb
  • Engine mount heat shield nuts: 89 in-lb
  • Engine mount through bolts: 70 ft-lb
  • Engine mount to engine block bolts : 37 ft-lb
  • Fuel injection rail bolts: 89 in-lb
  • Alternator bracket bolts: 37 ft-lb

Please let us know if we’ve missed any specifications on our LS1 Torque Specifications worksheet, leave us a comment below and let us know if you have any requests!

 

Like this:

Sours: https://my.prostreetonline.com/2013/12/05/faq-ls1-torque-specifications/
How to remove and replace a timing chain on LS based engines (in depth)
PartSpecAccelerator Control Cable Bracket Bolts89 in lbAir Conditioning Compressor Bolts37 ft lbAir Conditioning Compressor Bracket Bolts37 ft lbAir Conditioning Idler Pulley Bolt37 ft lbAir Conditioning Tensioner Bolt18 ft lbAir Injection Reaction (AIR) Pipe-to-Exhaust Manifold Bolts15 ft lbCamshaft Retainer Bolts18 ft lbCamshaft Sensor Bolt18 ft lbCamshaft Sprocket Bolts26 ft lbCatalytic Converter Nut18 ft lbConnecting Rod Bolts - First Design (First Pass)15 ft lbConnecting Rod Bolts - First Design (Final Pass)60 degreesConnecting Rod Bolts - Second Design (First Pass)15 ft lbConnecting Rod Bolts - Second Design (Final Pass)75 degreesCoolant Temperature Gauge Sensor15 ft lbCrankshaft Balancer Bolt (Installation Pass-to Ensure the Balancer is Completely Installed)240 ft lbCrankshaft Balancer Bolt (First Pass-Install a NEW Bolt After the Installation Pass and Tighten as Described in the First and Final Passes)37 ft lbCrankshaft Balancer Bolt (Final Pass)140 degreesCrankshaft Bearing Cap Bolts (Inner Bolts-First Pass in Sequence)15 ft lbCrankshaft Bearing Cap Bolts (Inner Bolts-Final Pass in Sequence)80 degreesCrankshaft Bearing Cap Side Bolts18 ft lbCrankshaft Bearing Cap Studs (Outer Studs-First Pass in Sequence)15 ft lbCrankshaft Bearing Cap Studs (Outer Studs-Final Pass in Sequence)53 degreesCrankshaft Oil Deflector Nuts18 ft lbCrankshaft Position Sensor Bolt18 ft lbCylinder Head Bolts (First Pass all M11 Bolts in Sequence)22 ft lbCylinder Head Bolts (Second Pass all M11 Bolts in Sequence)90 degreesCylinder Head Bolts (Final Pass all M11 Bolts in Sequence-Excluding the Medium Length Bolts at the Front and Rear of Each Cylinder Head)90 degreesCylinder Head Bolts (Final Pass M11 Medium Length Bolts at the Front and Rear of Each Cylinder Head in Sequence)50 degreesCylinder Head Bolts (M8 Inner Bolts in Sequence)22 ft lbCylinder Head Coolant Plug15 ft lbCylinder Head Core Hole Plug15 ft lbDrive Belt Idler Pulley Bolt37 ft lbDrive Belt Tensioner Bolts37 ft lbEngine Block Coolant Drain Plugs44 ft lbEngine Block Heater30 ft lbEngine Block Oil Gallery Plugs44 ft lbEngine Coolant Air Bleed Pipe Bolts and Studs106 in lbEngine Crossmember Bolts (Large)107 ft lbEngine Crossmember Bolts (Small)92 ft lbEngine Flywheel Bolts (First Pass)15 ft lbEngine Flywheel Bolts (Second Pass)37 ft lbEngine Flywheel Bolts (Final Pass)74 ft lbEngine Flywheel-to-Torque Converter Bolts44 ft lbEngine Front Cover Bolts18 ft lbEngine Mount Heat Shield Nuts89 in lbEngine Mount Stud-to-Engine Block37 ft lbEngine Mount Through Bolts70 ft lbEngine Mount Through Bolt Nuts59 ft lbEngine Mount-to-Engine Block Bolts37 ft lbEngine Rear Cover Bolts18 ft lbEngine Service Lift Bracket M10 Bolts37 ft lbEngine Service Lift Bracket M8 Bolt18 ft lbEngine Valley Cover Bolts18 ft lbEngine Wire Harness Clip Bolt37 ft lbEngine Wire Harness Ground Strap Bolt37 ft lbExhaust Gas Recirculation (EGR) Valve Bolts (First Pass)89 in lbEGR Valve Bolts (Final Pass)22 ft lbEGR Valve Pipe-to-Cylinder Head Bolts37 ft lbEGR Valve Pipe-to-Exhaust Manifold Bolts22 ft lbEGR Valve Pipe-to-Intake Manifold Bolt89 in lbExhaust Manifold Bolts (First Pass)11 ft lbExhaust Manifold Bolts (Final Pass)18 ft lbExhaust Manifold Heat Shield Bolts80 in lbExhaust Manifold Pipe Nuts26 ft lbFront Shock-to-Engine Crossmember Bolts48 ft lbFuel Injection Fuel Rail Bolts89 in lbGenerator Bracket Bolts37 ft lbGenerator Rear Bracket-to-Engine Block Bolt18 ft lbGenerator Rear Bracket-to-Generator Bolt18 ft lbGround Strap Bolt (at Rear of Cylinder Head)37 ft lbIgnition Coil-to-Bracket Bolts106 in lbIgnition Coil Bracket-to-Valve Rocker Arm Cover Bolts106 in lbIntake Manifold Bolts (First Pass in Sequence)44 ft lbIntake Manifold Bolts (Final Pass in Sequence)89 in lbKnock Sensors15 ft lbOil Filter22 ft lbOil Filter Fitting40 ft lbOil Level Indicator Tube Bolt18 ft lbOil Level Sensor115 in lbOil Pan Baffle Bolts106 in lbOil Pan Closeout Cover Bolt (Left Side)106 in lbOil Pan Closeout Cover Bolt (Right Side)106 in lbOil Pan Cover Bolts106 in lbOil Pan Drain Plug18 ft lbOil Pan M8 Bolts (Oil Pan-to-Engine Block and Oil Pan-to-Front Cover)18 ft lbOil Pan M6 Bolts (Oil Pan-to-Rear Cover)106 in lbOil Pressure Sensor15 ft lbOil Pump-to-Engine Block Bolts18 ft lbOil Pump Cover Bolts106 in lbOil Pump Relief Valve Plug106 in lbOil Pump Screen Nuts18 ft lbOil Pump Screen-to-Oil Pump Bolt106 in lbOxygen Sensor31 ft lbPositive Crankcase Ventilation (PCV) System Strap Nut (at Right Front Vapor Vent Pipe Stud)106 in lbPower Steering Pump Bolts18 ft lbPower Steering Pump Bracket Bolts18 ft lbSpark Plugs (Cylinder Heads-New)15 ft lbSpark Plugs (all Subsequent Installations)11 ft lbThrottle Body Bolts106 in lbTransmission Housing Bolt37 ft lbValve Lifter Guide Bolts106 in lbValve Rocker Arm Bolts22 ft lbValve Rocker Arm Cover Bolts106 in lbWater Inlet Housing Bolts11 ft lbWater Pump Bolts (First Pass)11 ft lbWater Pump Bolts (Final Pass)22 ft lbWater Pump Cover Bolts11 ft lb
Sours: https://ratedrmotorsports.com/blogs/ls-torque-specs/ls-torque-specs

Torque cover ls timing bolt

And then you see, he pulls the rubber and everything is in no hurry to go after the car. The Italians nodded their heads in delight. - You see, the men nodded their heads.

How to Replace Timing Cover 2000-06 Chevy Tahoe

That he also wants to experiment with his wife, but she does not understand and does not support him. And he would like to hear our advice on how to promote his wife in this regard, in order to liberate her sexually. I see, my Katya cheered up, even began to philosophize on this topic, give advice.

You will also like:

With his fingers. When they reached the house in which Masha lived, they began kissing passionately from the doorway, without even turning off the light, and. After that, almost until the morning, they had sex in all possible and impossible positions. In the morning Masha woke up not sleeping enough, but very happy, yesterday's love affairs reminded of a pleasant pain in her hole.

Since the size of her new lover's penis and Schwartz.



990 991 992 993 994