Echo weed wacker line replacement

Echo weed wacker line replacement DEFAULT

The weed eater line keeps coming out of the trimmer is very common trouble nowadays. This has become a common issue as we have started using several trimmer heads with a single trimmer. Nonetheless, it may happen for several reasons.

A weed eater is a handy tool that can handle a lot of grass cutting activities. But, the trimmer can be a matter of irritation when it fails to work properly. So, we need to take care of our string trimmer when it is in a good state as well as repair it if it becomes unserviceable.

Well, if you are struggling to hold your trimmer line on the trimmer, don’t crook your eyebrow anymore! We have covered all the possible reasons that might be giving you and your weed wacker the trouble.

Contents

Why Does A Weed Eater Line Keep Coming Out?

Several reasons may make the weed eater line keep coming out. We are going to discuss the reasons along with their troubleshooting processes. Read on the article to learn the process so that you can troubleshoot on your own.

Wounding The Line Backwards

A very common problem that a newbie or a careless trimmer user makes is backward wounding of the trimmer line. Moreover, this may happen unconsciously when you replace your trimmer head for the first time. The backward wounding makes the trimmer line keep coming out of its rail.

If this is the case, you must wound your trimmer line in the correct direction onto the twin spools. Remember, backward wounding loosens up the trimmer line whereas, forward movement tightens up it. So, you can never hold your trimmer on its rail by backward wounding.

Trimmer Head Lost Its Spring

Weed wacker has a strong spring inside its head. Due to prolonged use or unreliable fixation, the spring may come out of the head. If this is the reason, your trimmer head is now devoid of that vital spring.

Without that spring, the trimmer line will keep coming out. So, you need to make sure that the trimmer head has its spring. If the head lost its spring, try to collect/buy a spare spring and place it on the head.

Last update on 2021-08-20 / Affiliate links / Images from Amazon Product Advertising API

You may check out the Best Weed Eater for Women/Short Persons.

Using Several Trimmer Attachments

If you are using several trimmer attachments, the trimmer head is worn out much earlier. As a result, the head becomes incapable of grasping the trimmer. Moreover, the smooth guideline of the trimmer line becomes deviated with time.

When this is the case, you have to change the trimmer head with a new one. After that, to prolong the trimmer head’s life you may reduce the number of trimmer attachments.

Using Wrong Size Trimmer Head

To replace the old/worn-out trimmer head, you may buy a new trimmer head. There is no issue with the purchase if you buy the right trimmer head. If the trimmer head size is not the same as the one you are already using, this might bring trouble. As a result, the weed eater line may keep coming out.

To get rid of this trouble, always make sure that you are buying the exact size trimmer head and attachments. There are different trimmer head sizes depending on the job levels. For light job 0.065 inches to 0.085 inches in diameter, for medium-level jobs 0.085 to 0.105 inch and for heavy-duty anything beyond 0.105 inches.

Last update on 2021-08-31 / Affiliate links / Images from Amazon Product Advertising API

Conclusion

It is natural that a machine brings suffering when it becomes faulty. A weedeater is not out of that list. To offer you a healthy life both physically and mentally, many machines and equipment are contributing relentlessly. All you need is to take care of them so that they remain operational and produce less hazard.

We have tried our best to provide you the reasons why a weed eater line keeps coming out and their troubleshooting respectively. If you still can not fix the issue or unable to sort out the issue, drop your feedback via our comment box below.

Sours: https://www.powertoolhunter.com/weed-eater-line-keeps-coming-out/

My trimmer is eating the line instead of spitting it out?

@weedeater, EMMA, The stringers head may not have the string wrapped properly onto it. Remove all the string and replace the nylon line with appropriate/compatible line and try. If this does not do the trick disassemble the string spool head and check for dirt/debri(clean head) check for damage, rethread and try. If still no go the head must be damaged/worn and will have to be replaced. If still under warranty, use warranty for repaired/replaced/refund. Below 1st link is a video to show how to restring head on Echo Speed Feed head, 2nd link is for generic type Echo head, 3rd link is Echo SRM-225 Trimmer manual. Good luck. I hope this helped you out, if so let me know by pressing the helpful button.

https://www.youtube.com/watch?v=INyxjCrL...

https://www.hunker.com/12325929/how-to-r...

http://www.echo-usa.com/getattachment/70...

Was this answer helpful?

YesNo

Voted Undo

Score5

Cancel

Sours: https://www.ifixit.com/Answers/View/403857/My+trimmer+is+eating+the+line+instead+of+spitting+it+out
  1. Free crochet bunny slipper pattern
  2. Find the river chords
  3. Old mills and boon books
  4. 2021 gmc sierra review
  5. Home depot garage door monitor

How Do I Replace the Line on an Echo Gas Trimmer?

Exact procedures for restringing Echo line trimmers vary only slightly from model to model. Consult the user's manual if possible. Older Echo dual line trimmer heads store both lines side by side in a single line compartment. Restringing these older machines requires one longer length of line and a trickier technique than with the newer two-compartment models. Models with two compartments automatically separate two shorter lines, preventing most problems with crossed and tangled cutting cord.

Turn the cutting head clockwise without pressing it inward. When the retaining pin releases, pull the cutting head straight out to remove it from the trimmer. Use the pliers to pull out any remaining old cord.

  • Exact procedures for restringing Echo line trimmers vary only slightly from model to model.
  • Older Echo dual line trimmer heads store both lines side by side in a single line compartment.

Bend one inch of one end of each length of cutting line at a right angle to form an L-shaped hook. Hold the spool in your left hand with the open socket side against your palm. Insert one L-hook in the starting holes of each compartment of the spool. The line should drape to the right.

Wind the two lines carefully on the spool by turning the spool clockwise and holding the lines in your right hand. Wrap the lines tightly and evenly on the spool. Avoid overlapping the line.

  • Bend one inch of one end of each length of cutting line at a right angle to form an L-shaped hook.
  • Hold the spool in your left hand with the open socket side against your palm.

Place each line in a notch on the inner hub when all but about six inches of line has been wound onto the spool. The notches hold the line by friction and space the line ends 180 degrees apart on the spool.

Match each line end to the feed port in the trimmer. Push the lines through the opposing ports from the inside of the hub and seat the spool on the shaft. Turn the spool counterclockwise to engage the locking pin.

Pull each line tight. A firm pull on the line end frees the cutting line from the friction notch on the inner hub, allowing the automatic feed to work. Trim the lines to an equal length with the wire cutter jaws of the pliers.

  • Place each line in a notch on the inner hub when all but about six inches of line has been wound onto the spool.
  • Push the lines through the opposing ports from the inside of the hub and seat the spool on the shaft.

Older model Echo spools with only one line compartment wind in much the same way as the new versions. Use one 20-foot length of line, fed through the hole in the center of the spool's hub. Fold the line ends back to the right and wind them side by side on the hub without crossing. Keeping an index finger on the hub between the lines helps.

References

Resources

Tips

  • Older model Echo spools with only one line compartment wind in much the same way as the new versions. Use one 20-foot length of line, fed through the hole in the center of the spool's hub. Fold the line ends back to the right and wind them side by side on the hub without crossing. Keeping an index finger on the hub between the lines helps.

Writer Bio

James Young began writing in 1969 as a military journalist combat correspondent in Vietnam. Young's articles have been published in "Tai Chi Magazine," "Seattle Post-Intelligencer," Sonar 4 ezine, "Stars & Stripes" and "Fine Woodworking." He has worked as a foundryman, woodturner, electronics technician, herb farmer and woodcarver. Young graduated from North Seattle Community College with an associate degree in applied science and electronic technology.

Sours: https://www.gardenguides.com/86036-replace-line-echo-gas-trimmer.html
Echo SRM 225 - Replacing the Trimmer Line

String Trimmers

The Echo SRM-225 is part of the String Trimmers test program at Consumer Reports. In our lab tests, String Trimmers models like the SRM-225 are rated on multiple criteria, such as those listed below.

Trimming Indicates how quickly and neatly models cut grass.

Edging How quickly and neatly models trimmed a vertical line along a walkway.

Tall grass and weeds Indicates cutting power in tall grass and weeds.

Sours: https://www.consumerreports.org/products/string-trimmers-28942/string-trimmer-28729/echo-srm-225-59722/

Replacement echo weed wacker line

How to Change the String on One of These

Changing the string is a necessary evil in having a trimmer. When the string runs out, you need to change it, and this process can be intimidating for the lawn care novice. Certainly, you could look into purchasing a speed feed head, but there are advantages to opting for a bump head trimmer. For one, they are less expensive, but another benefit is that they are generally easier to disassemble. In this post, we review exactly what you need to do to change the string on a bump head trimmer.

Remove the head

To remove the head of the trimmer, grab the outside of the bump head, turning it clockwise until it clicks. After this is completed, make sure to clean out the inside, removing any debris that may be clogging up the head. Changing the string requires some fine motor skills, so you need a clean head to successfully accomplish this task.

Inserting the string

Once you’ve removed the head, you can insert the string. With a bump head stringer, you will generally need about 15 feet of string. First, locate the holes through which you will insert the string. Then, insert the strings into the holes.  Some times it is easier if you bent the very end of the strings.  Wined the strings in the direction of the arrows on the spool, and lock into the cut outs on the spool so the strings do not come unwound.

Reattaching the head

To reattach the head, insert both ends of string through the holes of the trimmer. This is a bit of a delicate procedure, as you need to watch out so that the strings do not fly apart. When you have the head lodged in place, pull on the strings. This acts as a clamp and will hold the head into place.

Changing the string on a trimmer bump head requires a decent amount of finesse, but following the instructions above should allow you to manage the task with minimal difficulty.

Note: for a visual demonstration of how to change the string on a bump head trimmer, check out the video demonstration at the LawnEQ YouTube page.

Sours: https://blog.lawneq.com/how-to-change-the-string-on-an-echo-trimmer-bump-head/
Echo SRM 225 Fuel Line Repair

How to String a Echo Weed Eater

Are You Still Confused About Replacing A Weed Eater Head?

If you’re still struggling with restringing the device, then a demonstration video may help.

Here’s just one video example that can help you restring your device.

As you can see, restringing the device requires minimal effort.

The gas-line trimmer also features quicker installation times than others on the market.

Using the correct tools can also help speed up the process.

Troubleshooting the Echo GT-225

While the Echo GT-225 does promise to be a hassle-free device, things can still go wrong.

If you’ve experienced problems with restringing, we can help give you guidance on a few common issues.

Here are the most frequent ones that we’ve found:

Not Stringing Correct String Type/Size

The GT-225’s recommended string type is nylon, and the size is 0.080 in diameter.

We’ve found that the Cross-Fire brand is the most compatible with the weed eater, but we’ve also seen other gardeners use other size strings.

If you experience issues with strings, one problem that may be occurring is that the holes in the head may be too big.

Over time, the device can start to chip away at the holes, and the string may become too loose.

You’ll notice this problem if you’ve restrung the device and found that the string seems to slip back into the head.

To fix this problem, you can invest in the Crossfire nylon line up to 0.115 in diameter.

We don’t recommend using anything thicker than this as it can clog the device up and cause issues in the long run.

Not Stringing Enough String

When you purchase a string, you won’t be using the whole spool.

It’s best to give at least two feet of string on each side of the device.

However, we often see people use too much or too little string.

This can cause problems in the long run and render the device to be less effective.

How would you even notice if there’s not enough string?

The string may be too short and won’t be cutting the grass or weeds close enough to the edge.

You will notice this if you’re going for precision.

If there’s too much string, then you’ll notice that the edge of the trimmer will start to get clogged and won’t cut any of the grass.

Not Replacing String Frequently 

There are many factors that go into how often you need to replace the string.

We’ve found that it’s best to tell if the grass is starting to look a bit dull.

The string will start to thin down and often times fail to cut the grass.

At this point, you’ll want to restring the device.

As a general guide, you should replace the string every half a year.

If you use the equipment frequently, you may have to replace it every few weeks.

Alternatively, you can also invest in a different head type.

The Echo features an extensive range of attachments and accessories that make lawn maintenance hassle-free and straightforward.

One of the most significant advantages of the Echo GT-225 is that it’s compatible with curved shaft trimmer heads.

The heads can store up to 20 feet of string at once and won’t need to be replaced as frequently.

While this can be a good thing, it’s more challenging to restring and require you to purchase a more substantial amount of string at once.

However, in the long run, we find this to be effective for those who don’t want to restring the device frequently.

Would We Recommend the GT-225?

Compared to the older models, we find that the GT-225 is much easier to manage.

There are many positive reviews online, and the most recent model is known to have a more powerful engine than many other older models.

This is likely due to the new engine.

The extra accessories and simplified head design also make maintaining the device easy.

As for restringing, you’ll find that it’s much easier to replace the string in the GT-225 than their previous models.

You won’t have to mess with extra tools, including screwdrivers or knots and bolts.

Plus, the weight of the device is designed to be easier to lift and use, which makes getting a precise trim easier.

Overall, we’d say that we’d highly recommend this if you’re looking for a powerful yet manageable unit.

Conclusion

Learning how to string a Echo weed eater can be difficult if you’re not sure what to look for.

Thanks to GT-225’s upgraded design, you won’t need to take the whole unit apart.

Instead, all you’ll need to do is loop the nylon string through the two holes.

If you run into any issues, Echo customer support can help walk you through the restringing process.

Aside from that, the model comes with up to five years covered warranty.

This ensures that you’re getting a unit that will last and won’t break down on you anytime soon.

Hopefully, we’ve helped you discover how to restring a weed eater.

Sours: https://trimthatweed.com/how-to-string-a-echo-weed-eater/

You will also like:

And now severe punishment will follow. The woman was accused of theft. They wanted to chop off her hand, but Salima, as a lawyer, made her stay in prison for half a year, with.



469 470 471 472 473