Laptop cursor not moving hp

Laptop cursor not moving hp DEFAULT

HP Touchpad not Working [SOLVED] &#; Quickly &#; Easily

HP Touchpad not working? This could be very frustrating, especially when you know that you haven&#;t done anything that causes the problem.

But don&#;t panic! This is a common issue and you can fix HP touchpad not working quickly and easily!

How do I fix Touchpad not working on HP 

Here are the solutions you can try to fix HP laptop Touchpad not working. You don&#;t need to try them all; just work your way down until your problem is solved.

  1. Enable the Touchpad service for your laptop
  2. Update the Touchpad driver
  3. Troubleshoot the hardware issue

Fix 1: Enable the Touchpad service for your laptop

If the Touchpad is disabled, your laptop Touchpad stops working. So you can check and enable the Toucpad in your laptop to fix it. There are two ways to enable Touchpad in your HP laptop:

Way 1: Check the dot at the upper left corner

There is generally a dot at the upper left corner on the Touchpad pane, so you can double tap the dot on the upper left to enable the HP Touchpad.

Way 2: Enable the Touchpad in Settings

You can go to the Mouse settings in your laptop to enable the Touchpad:

Note: The screenshots below are from Windows 10, but the fixes apply to Windows 8 & 7.

1) On your keyboard, press the Windows logo key and X at the same time.

2) Click Settings in the popup menu.

3) Click Devices.

4) Click Mouse and touchpad, and click Additional mouse options.

5) Select the Touchpad tab (or Hardware tab or Device settings tab), and make sure your Touchpad is enabled.

6) Reboot your laptop and try your Touchpad.

Fix 2: Update the Touchpad driver

The missing or outdated Touchpad driver can cause your laptop touchpad not working issue, so you can update your Touchpad driver to fix the issue.

There are two ways to update the Touchpad driver: manually and automatically.

Manually update the Touchpad driver &#; You can update the touchpad driver by searching the driver from the manufacturer, then download and install the driver  into your computer. Ensure to download the driver that is compatible with your Windows OS. This requires time and computer skills.

Automatically update the Touchpad driver &#; If you are not familiar with playing around with drivers, you can do it automatically with Driver Easy.

Driver Easy will automatically recognize your Windows system and find the correct driver for your video adapter. You don’t need to risk downloading the wrong Touchpad  driver.

You can download and install your drivers by using either Free or Pro version of Driver Easy. But with the Pro version it takes only a few clicks (and you get full support and a day money back guarantee):

1) Download and install Driver Easy.

2) Run Driver Easy and click the Scan Now button. Driver Easy will then scan your computer and detect any problem drivers.

3) Click the Update button next to the flagged Touchpad device name to automatically download the correct version of the driver (you can do this with the FREE version), then install it in your computer.

Or click Update All to automatically download and install the correct version of all the drivers that are missing or out of date on your system. (This requires thePro version which comes with full support and a day money back guarantee. You’ll be prompted to upgrade when you click Update All.)

4) Restart your laptop and try your Touchpad.

Note: You can also try to uninstall and reinstall the Touchpad driver with Driver Easy (Pro version required). This is useful especially when you are trying to remove any driver causing troubles and reinstall it.

If your touchpad issue still persists, don&#;t worry. There&#;s something else to try.

Fix 3: Troubleshoot the hardware issue

If touchpad on your HP laptop is still not working, you can try the troubleshooting utility in Windows to automatically fix the hardware issue detected. Follow these steps:

1) Open Control Panel in your laptop, and click Troubleshooting.

2) Click Hardware and Sound.

3) Click Hardware and device.

4) Click Next, then wait for the troubleshooting process to finish.

5) Follow the on-screen wizard to automatically fix the detected issues.

6) Reboot your laptop and try your Touchpad.

These&#;re the effective solutions to fix HP Touchpad not working. Which methods helps you through? If you have any questions, feel free to comment below and we&#;ll see what more we can do to further help.

people found this helpful

Sours: https://www.drivereasy.com/knowledge/how-to-fix-hp-touchpad-not-working/

HP Touchpad Not Working

Is your HP touchpad no longer responsive? It can feel crippling to not be able to use your laptop when your main point of navigation – the cursor – is completely useless.

Don’t fret, there’s typically a quick solution to getting your laptop touchpad working again. We’ve listed the following steps to take in order of most common issues and easiest to solve.

Double Tap the Top Left Corner to Enable the HP Touchpad

Make sure that the laptop touchpad has not accidentally been turned off or disabled. You might have disabled your touchpad on accident, in which case you will need to check to make sure and if needed, enable the HP touchpad again.

The most common solution will be to double tap the top left corner of your touchpad. If you see a small glowing orange light, this usually indicates that the touchpad is not working and has been disabled.

Restart Your Computer

Your computer might just need a reboot. If you have not tried restarting your computer, do this now. If you do not have an external mouse, simply press the Ctrl, Alt & Delete keys simultaneously and tab until you highlight the power symbol. Hit enter, and tab up until you see restart.

(You can also do a hard restart by pressing the power button, and turning back on, but this is not usually recommended as it may result in data corruption in any files you have open.)

Check For Computer Driver Updates

It might be that you need to update the drivers for your touchpad. Check to see if you can use an external mouse.

If the external mouse is not working or you are not able to access one, follow the instructions below to navigate through your computer using the keyboard, very carefully.

Tip: If you’ve never updated your computer drivers before or you aren’t comfortable with making these changes, we recommended using a tool like Driver Support to do it for you! The software securely scans your computer for outdated drivers and updates them automatically – saving you the frustration and time of trying to fix the problem yourself.

  1. Press the Windows key and press R. The &#;Run&#; window should pop up.
  2. Type devmgmt.msc and press enter.
  3. Expand the &#;Mice and other pointing devices&#; window. If you do not have access to a mouse, press tab once and use the down arrow on your keypad. The &#;right arrow&#; will expand the device section.
  4. Press enter on the &#;Synaptics&#; device and tab over on the window until you open the &#;Drivers&#; tab.
  5. Select update driver and automatically update the driver.
  6. Once complete, restart your computer.
  7. Make sure to unplug the USB mouse or any other devices before restarting.

Manually Reinstall or Update your HP Drivers

If your computer was unable to automatically update, your files may be corrupted or you may need to download the drivers from the manufacturer directly.

It’s not recommended that you do this unless you are comfortable download and installing files onto your computer.

We recommend downloading and running Driver Support – the software will check your computer for all missing or corrupted files and update them for you. It will also keep your computer updated so you don’t run into this issue again.

Try This Time-Saving Shortcut
Start using Driver Support | ONE today and save time and frustration dealing with common Windows device issues. The software will inventory your computer for all active device types we support upon installation. When fully registered the service will update drivers for you automatically.
Download Driver Support

 

If your external mouse is also not working, this indicates a driver issue as well, so it may be worth your time to allow a software program do the work.

You may also want to download the driver updates you need onto a flash drive from a different computer so that you’re not navigating the internet with your tab button.

If you are familiar with using computers and comfortable downloading and installing software, follow these steps.

  1. Press the Windows key and press R. The &#;Run&#; window should pop up.
  2. Type devmgmt.msc and press enter.
  3. Expand the &#;Mice and other pointing devices&#; window. If you do not have access to a mouse, press tab once and use the down arrow on your keypad. The &#;right arrow&#; will expand the device section.
  4. Press enter on the &#;Synaptics&#; device and tab over on the window until you open the &#;Drivers&#; tab.

Check The HP Touchpad Driver Settings

You might need to manually turn on the Touchpad under your settings. Press the Windows button and “I” at the same time and click (or tab) over to Devices > Touchpad.

Navigate to the Additional Settings option and open the Touchpad Settings box. From here, you can toggle the HP touchpad settings on or off.

Restart your computer to make sure the changes take place. If it is set to “on” and the touchpad still does not work, your device may be experiencing hardware issues or you want to use a tool like Driver Support to fix the issue for you.

Try This Time-Saving Shortcut
Start using Driver Support | ONE today and save time and frustration dealing with common Windows device issues. The software will inventory your computer for all active device types we support upon installation. When fully registered the service will update drivers for you automatically.
Download Driver Support

 

Sours: https://www.driversupport.com/knowledge-article/hp-laptop-touchpad-not-working/
  1. Wow classic zul gurub quests
  2. Apartments for rent spokane
  3. Pocket notebook with alphabet tabs

Is Your Laptop Touchpad Not Working? Here&#;s the Fix

When your laptop touchpad stops working, it's easy to go into a panic. If you can't move your mouse cursor, it's hard to get much done on your computer.

But don't fret. Chances are that when your laptop mouse pad is not working, the fix is fairly simple. We'll walk you through common troubleshooting steps to fix a trackpad that's not functional. Most of these tips apply to Windows, but those on a Mac can use some of them too.

Is Your Whole Computer Frozen?

This sounds a bit silly, but it's worth double-checking. If your touchpad stops working as a one-off occurrence, your computer could be totally locked up. In that case, neither the touchpad nor the keyboard will work at all.

To test this, hit the Windows key to open the Start Menu, then try Ctrl + Alt + Delete to open the Security screen. If neither of these has any result, give your computer a few moments to process whatever it's doing. After several minutes, if it's still frozen, you'll need to press and hold the physical Power button to power it down.

Hopefully, this is a one-time issue. Review common reasons Windows becomes unresponsive if you need to diagnose a deeper problem.

Check Your Keyboard's Touchpad Key

One of the most common causes of a laptop touchpad not working is that you've accidentally disabled it with a key combination. Most laptops have a Fn key that combines with the F1, F2, etc. keys to perform special operations.

Many of these, like changing the brightness or disabling wireless functionality, are useful. However, one of these key combinations will disable the laptop touchpad on many laptops. Since it's easy to hit by mistake, you might think your touchpad is broken if you toggle this.

The exact key depends on your laptop model (this will differ among Asus, HP, Lenovo, and other models), but it usually has a square trackpad-looking icon, sometimes with an X next to it. Some keyboards show a light on this key to let you know the mouse pad is turned off.

Below, you can see the F5 key on an HP Elitebook, which turns the mouse pad off when combined with the Fn key.

Try pressing this key combo again and see if your trackpad comes back to life.

Remove External Mice

Moving on, another simple but important troubleshooting step to try is unplugging any USB mice you have connected to your laptop. You should also disconnect any Bluetooth mice you might use.

The reason for this is that some laptops (and Windows 10 itself) have a feature that automatically disables the touchpad when you connect an external mouse. This could be why your mouse pad stops working. For best results when testing this, shut down your system, unplug all non-essential devices, and boot back up.

If you reboot and your touchpad works, you've found your issue. You might be able to tweak this setting to keep your trackpad active even with a mouse plugged in (see below for more on this).

Review Mouse Settings in Windows 10

You should next review the mouse settings in Windows, in case something got messed up there. Head to Settings > Devices > Touchpad first.

Here, make sure you have the Touchpad slider enabled. There's also a box below this labeled Leave touchpad on when a mouse is connected, as mentioned above. While you're here, take a look at the other touchpad options to make sure it behaves as you expect.

If you can't resolve your problem from this menu, you might be able to access touchpad-specific settings in another location. Open the Control Panel by searching for it via the Start Menu, then change the View by option to Small icons or Large icons. Select the Mouse entry here and a new window will open.

On the far-right side of this window, you should see a tab labeled Device Settings, TouchPad, or something similar. You can enable or disable the touchpad here; you might find that it's disabled if it wasn't working before. Try re-enabling it and see if that gets your touchpad working again.

Dig Into the Device Manager

If your laptop mouse pad is still not working, you'll have to jump into some deeper troubleshooting. Press Win + X (or right-click the Start button) to open the Power User menu, then select Device Manager.

Here, expand the Mice and other pointing devices category. You'll see multiple entries here if you've connected other mice too. Double-click on one and look under Location to figure out what it is. If this says On USB Input Device or similar, it's not your touchpad.

Once you've found your mouse, try right-clicking and choosing Disable device, then Enable device again. Next, right-click and select Update driver, then Search automatically for updated driver software. It's unlikely this will actually find a new driver to fix the issue, but sometimes it comes through.

If you see any devices in this header that have a yellow exclamation point or red X by them, this indicates a driver issue.

Read more: How to Find & Replace Outdated Windows Drivers

Finally, it's worth visiting your laptop manufacturer's website and downloading the latest driver. These often work better than the generic drivers Windows uses, and could thus clear up your issues.

If you have a manufacturer utility like Lenovo System Update installed, use that to check for updates. Otherwise, run a Google search for your laptop name plus "drivers" and look for a Downloads or Updates section on your device's page on the manufacturer's website. Install the latest update to see if this fixes your touchpad problem.

You may want to right-click the affected entry in the device manager and hit Uninstall device before installing a new driver.

Look for Touchpad Settings in the BIOS

Your computer's BIOS or UEFI controls many settings independent of any operating system. It's possible that your touchpad is disabled in the BIOS, completely preventing Windows from accessing it.

You'll need to enter your PC's BIOS by pressing F2, Del, or a similar key as soon as you turn it on. From there, look for an entry called Internal Pointing Device, Touchpad, Trackpad, or similar. This may be under an Advanced heading.

Make sure it's not disabled. If it is, turn it back on and Windows should then be able to recognize it.

Disable Tablet PC Services

Windows 10 devices that have a touchscreen, such as 2-in-1 hybrids, have a special service called Tablet PC Input Service. This controls the touch functionality, and part of that is disabling your trackpad when you're in tablet mode.

There's a small chance this could interfere with your trackpad in normal use. It's worth looking at if nothing else has helped to this point. Type services into the Start Menu and launch the Services utility. Here, scroll to Tablet PC Input Service, right-click it, and choose Stop.

If your touchpad works after you do this, you've found your issue. You can change the Startup type to Manual to prevent it from running unnecessarily. Disabled will keep it from running at all, but this could cause erratic behavior when using your device in tablet mode.

Mac Mousepad Not Working?

We've mainly looked at troubleshooting Windows trackpad issues here, but MacBook trackpads can run into trouble too. Thankfully, we have a full guide to troubleshooting MacBook trackpad problems, so take a look at that if you're a Mac user.

Touchpad Still Not Working? You May Have a Hardware Problem

The above steps should fix the majority of trackpad problems. However, there's a chance your mousepad is still not working.

In that case, you likely have a hardware issue. Perhaps a cable is damaged or the touchpad has worn out. In those instances, you should take your computer to a repair shop and get a professional opinionor just start using an external mouse.

You can get a decent mouse for cheap to hold you over—just make sure you know what to look for when buying one.

ShareTweetEmail

The Computer Mouse Guide: 8 Things to Know When Buying a Mouse

Planning on buying a new mouse? Here's everything you need to know before making your purchase to get the best mouse for your needs.

Read Next

About The Author
Ben Stegner ( Articles Published)

Ben is a Deputy Editor and the Onboarding Manager at MakeUseOf. He left his IT job to write full-time in and has never looked back. He's been covering tech tutorials, video game recommendations, and more as a professional writer for over seven years.

More From Ben Stegner

Subscribe to our newsletter

Join our newsletter for tech tips, reviews, free ebooks, and exclusive deals!

Click here to subscribe

Sours: https://www.makeuseof.com/tag/fix-laptop-touchpad-not-working/
FIX: HP Laptop Touchpad Not Working in Windows 10/8/7

Fix HP Touchpad Not Working in Windows  If you are facing an issue where your HP Laptop mouse pad/touchpad has suddenly stop working then don’t worry as today we are going to see how to fix this issue. The touchpad not responding or not working issue might be caused because of corrupted, outdated or incompatible touchpad drivers, touchpad might be disabled with the physical key, incorrect configuration, corrupt system files etc. So without wasting any time let’s see How to Fix HP Touchpad Not Working in Windows 10 with the help of the below-listed guide.

Contents

Fix HP Touchpad Not Working in Windows 10

Make sure to create a restore point just in case something goes wrong.

Method 1: Update Touchpad driver

1.Press Windows Key + X then select Device Manager.

2.Expand Mice and other pointing devices.

3.Right-click on your HP Touchpad and select Properties.

4.Switch to Driver tab and click on Update Driver.

5.Now select Browse my computer for driver software.

6.Next, select Let me pick from a list of device drivers on my computer.

7.Select the HID-compliant device from the list and click Next.

8.After the driver is installed restart your PC to save changes.

Method 2: Reinstall Mouse Driver

1.Press Windows Key + R then type control and hit Enter to open Control Panel.

2.In device manager window, expand Mice and other pointing devices.

3.Right-click on your touchpad device and select Uninstall.

4.If it asks for confirmation then select Yes.

5.Reboot your PC to save changes.

6.Windows will automatically install the default drivers for your Mouse and will Fix HP Touchpad Not Working in Windows

Method 3: Use the Function Keys to Enable TouchPad

Sometimes this problem can arise due to touchpad being disabled and this can happen by mistake, so it’s always a good idea to verify that this is not the case here. Different laptops have different combination to enable/disable the touchpad for example in my HP laptop the combination is Fn + F3, in Lenovo, it’s Fn + F8 etc.

In most of the laptops, you will find the marking or the symbol of the touchpad on the function keys. Once you find that press the combination to enable or disable the Touchpad which should Fix HP Touchpad is not working issue.

If this doesn’t fix the issue then you need to double-tap on the TouchPad on/off indicator like shown in the below image to turn off the Touchpad light and enable the Touchpad.

Method 4: Perform Clean-Boot

Sometimes 3rd party software can conflict with Mouse and therefore, you may experience Touchpad is not working issue. In order to Fix HP Touchpad Not Working in Windows 10, you need to perform a clean boot in your PC and diagnose the issue step by step.

Method 5: Enable Touchpad from Settings

1.Press Windows Key + I then select Devices.

2.From the left-hand menu select Touchpad.

3.Then make sure to turn on the toggle under Touchpad.

4.Reboot your PC to save changes.

This should resolve the HP Touchpad Not Working in Windows 10 but if you’re still experiencing the touchpad issues then continue with the next method.

Method 6: Enable touchpad from BIOS configuration

The touchpad is not working issue sometimes may occur because the touchpad may be disabled from BIOS. In order to fix this issue, you need to enable touchpad from BIOS. Boot your Windows and as soon as the Boot Screens comes up press F2 key or F8 or DEL.

Method 7: Enable the touchpad In Mouse Properties

1.Press Windows Key + I then select Devices.

2.Select Mouse from the left-hand menu & then click on Additional mouse options.

3.Now switch to the last tab in the Mouse Properties window and the name of this tab depends on the manufacturer such as Device Settings, Synaptics, or ELAN etc.

4.Next, click your device then click “Enable.

5.Reboot your PC to save changes.

Method 8: Run HP Diagnostic

If you’re still not able to fix the HP touchpad not working issue then you need to Run HP Diagnostic to troubleshoot the issue using this official guide.

Recommended:

That’s it you have successfully Fix HP Touchpad Not Working in Windows 10 but if you still have any questions regarding this tutorial then feel free to ask them in the comment’s section.

nv-author-image

Aditya Farrad

Aditya is a self-motivated information technology professional and has been a technology writer for the last 7 years. He covers Internet services, mobile, Windows, software, and How-to guides.

Sours: https://techcult.com/fix-hp-touchpad-not-working-in-windows/

Not laptop moving hp cursor

How to Unlock a Frozen Mouse on an HP Laptop

When the mouse on your HP laptop doesn’t move, it could be due to a locked touchpad, a frozen application, a problem with the driver, a hardware issue, or a locked-up computer. To unlock a frozen mouse on an HP laptop, you need to check each of those possibilities and attempt various fixes until it starts moving again.

A frozen mouse on an HP laptop can manifest in a variety of ways, including:

  • The mouse cursor remains stationary when you move your finger around on the touchpad.
  • The screen appears to freeze, and the cursor won’t move, or you are unable to locate the cursor.
  • Nothing happens when you click on things like buttons and links.

Causes of a Frozen Mouse on an HP Laptop

When the mouse freezes up on an HP laptop, the most obvious culprit is a malfunctioning touchpad driver or hardware. However, there are a lot of other potential culprits. A frozen app or an app that’s drawing more resources than your laptop can handle can also prevent the mouse from working correctly. The touchpad could also be locked, so simply unlocking it will take care of the problem.

How to Fix a Frozen Mouse on an HP Laptop

To get the mouse working again on your HP laptop, try each of the following troubleshooting steps in order:

  1. Make sure the touchpad isn’t disabled. Some HP laptops allow you to quickly disable the touchpad, which is useful if you’re using a mouse and keep accidentally brushing the touchpad with your palms. To disable or enable the touchpad, try double-tapping the upper left corner of the touchpad. If your HP laptop supports this feature, your touchpad will start working again.

  2. Try rebooting your computer. While a frozen computer isn’t the most common cause of a mouse not working on an HP laptop, it is one of the easiest of all the potential fixes. With a frozen mouse, you can reboot with your keyboard by using this method:

    1. Press CTRL + ALT + DEL.
    2. Press TAB until you reach the power icon.
    3. Press enter.
  3. Check the touchpad settings. If your touchpad is disabled in Windows settings, and you don’t have an external mouse connected, the cursor will appear frozen or nonfunctional. Check the settings, and enable the touchpad if necessary.

    1. Press Windows key + I.
    2. Use the tab and arrow keys to select Devices, then press enter.
    3. Select Touchpad.
    4. Make sure the Touchpad toggle is On.
  4. Use HP Assistant to check for driver updates. The HP Support Assistant includes a variety of tools and wizards to help fix various problems. Launch this assistant, and use it to check for any driver updates.

    1. Open HP Support Assistant.
    2. Select Fixes & Diagnostics from the sidebar.
    3. Select Software & Drivers.
    4. Allow the app to search for updates and apply them if any are available.
  5. Use the HP Assistant to check your hardware. The HP Support Assistant can also detect a variety of hardware faults. If your touchpad has broken, the tool may be able to identify that problem and get you in touch with HP support.

    1. Open HP Support Assistant.
    2. Select Fixes & Diagnostics from the sidebar.
    3. In the Run hardware diagnostics section, select Launch.
    4. Follow the on-screen prompts to identify and fix any hardware issues.
  6. Update Windows drivers. If the HP Support Assistant wasn’t able to update your drivers, you could do it yourself manually. You may need to locate the driver yourself if Windows Update is unable to do so.

  7. Make sure you've enabled the touchpad in the Device Manager. Open the Device Manager, and look for Mouse and other pointing devices. If you see a device with an exclamation mark next to it, that means it's been disabled, there is a conflict or a driver issue.

  8. Attempt to fix the touchpad in safe mode. Boot into safe mode, and attempt your fixes there. If you could not update drivers before, try it again once you’ve booted into safe mode. If that doesn’t help, then try uninstalling any recently installed applications while you’re still in safe mode. If you installed something right before your mouse stopped working, there might be a conflict.

FAQ

  • To disable the touchpad on a Windows 10 laptop, tap the key with an icon resembling a touchpad. Alternatively, press the Windows key and go to Settings > Devices > Touchpad. The steps should be similar for Windows 8 laptops.

  • To change mouse sensitivity in Windows 10, go to Settings > Mouse and change the cursor or scroll speeds. Then, select Additional Mouse Options to change the double-click speed if desired.

  • Go to Settings > Devices > Mouse & Touchpad > Additional Mouse Options. Then, select the Device Settings tab > Settings > Pinch Zoom > clear the Enable Pinch Zoom box.

Thanks for letting us know!

Sours: https://www.lifewire.com/fix-frozen-mouse-on-hp-laptop
How to Fix Mouse and Touchpad Problems in Windows 10, 8.1, 7 – (3 Fixes)

My cursor disappears after logging in to my laptop

Hello @Renandron,

 

 

Please try the below steps !!

 

 

Solution 1) Re-enable your mouse

 

Windows may have disabled your mouse during the upgrade from a previous version or while your computer was in sleep mode. This will make your mouse unusable and your mouse cursor disappear. You should re-enable your mouse in order to restore its cursor.

 

There are two ways you can re-enable your mouse. First, if you are using a laptop, you should try pressing the key combination on your laptop keyboard that can turn on/off your mouse. Usually, it is the Fn key plus F3F5F9 or F11 (it depends on the make of your laptop, and you may need to consult your laptop manual to find it out).

You can also enable your mouse in the mouse settings. To do so:

 

1) Press the Win key on your keyboard, then type “mouse“. When you see “Mouse settings appear in the menu above, press the up or down arrow on your keyboard to highlight it, then press Enter.

 

2) In Mouse settings, press Tab on your keyboard until Additional mouse options (under Related Settings) is highlighted. Press Enter on your keyboard to select it.

3) In the Mouse Properties window, press Tab on your keyboard until the Buttons tab in the window is highlighted (with a dotted border.)

 

 

4) Press right arrow key on your keyboard until Device Settings in the window is opened. (The name of this tab could be different, depending on the mouse you use.)

 

5) If your device is disabled, press Tab on your keyboard until the Enable button is high lighted, and press Enter to enable the device.

6) If this method solves the problem, you will be able to see your mouse pointer again.

 

 

Re-enable your mouse

Windows may have disabled your mouse during the upgrade from a previous version or while your computer was in sleep mode. This will make your mouse unusable and your mouse cursor disappear. You should re-enable your mouse in order to restore its cursor.

There are two ways you can re-enable your mouse. First, if you are using a laptop, you should try pressing the key combination on your laptop keyboard that can turn on/off your mouse. Usually, it is the Fn key plus F3F5F9 or F11 (it depends on the make of your laptop, and you may need to consult your laptop manual to find it out).

You can also enable your mouse in the mouse settings. To do so:

1) Press the Win key on your keyboard, then type “mouse“. When you see “Mouse settings appear in the menu above, press the up or down arrow on your keyboard to highlight it, then press Enter.

2) In Mouse settings, press Tab on your keyboard until Additional mouse options (under Related Settings) is highlighted. Press Enter on your keyboard to select it.

3) In the Mouse Properties window, press Tab on your keyboard until the Buttons tab in the window is highlighted (with a dotted border.)

4) Press right arrow key on your keyboard until Device Settings in the window is opened. (The name of this tab could be different, depending on the mouse you use.)

5) If your device is disabled, press Tab on your keyboard until the Enable button is high lighted, and press Enter to enable the device.

6) If this method solves the problem, you will be able to see your mouse pointer again.

 

 

 

Solution 2. Update the Mouse Driver to Fix the Missing Cursor in Windows 10

 

Since there's no mouse pointer and the mouse is not working, you can only process updating mouse driver with the keyboard:

1. Press Windows + R keys altogether to bring out the Run box.

2. Type devmgmt.msc and then hit Enter to open Device Manager.

mouse-cursor-disappearing-on-windowspng

3. Press Tab to switch to devices list.

4. Use arrow keys to scroll down to Mice and other pointing devices and use the right arrow key to expand it.

no-mouse-cursor-in-windowspng

5. Use the down arrow key to select your mouse device.

6. Press Shift + F10 open the context menu.

mouse-pointer-disappeared.png

7. Choose Update driver with arrow keys and hit Enter.

8. Follow the on-screen installation instructions to finish the updates and then check whether the lost cursor or mouse not working issue persists on your Windows 10 laptop 

 

 

 

Hope this helps, for any further queries reply to the post and feel free to join us again !!

 

 **Click the White Thumbs Up Button on the right to say Thanks**

Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

 

Thank You,

GBL84

I am not an HP Employee

 

Sours: https://hwww3.hp.com/t5/Notebook-Operating-System-and-Recovery/My-cursor-disappears-after-logging-in-to-my-laptop/td-p/

You will also like:

Well, that's good. Good morning. I mean, I dont understand why I woke up in your room, but will you tell me about it tonight when I come back, okay.



1394 1395 1396 1397 1398