Float valve instant pot

Float valve instant pot DEFAULT

Instant pots are often an appliance you might not think needs a lot of fixing and they frequently don&#;t but there is the odd time, especially if you have had yours for a number of years you might find certain parts need replacing or come loose.

There are a number of ways to fix your instant pot valve if it falls out from replacing the valve altogether, cleaning it and replacing it back on or checking that the valve has not been misshapen in any way.

In this article, I am going to talk about what to do if your instant pot valve falls out, breaks or comes loose. I will also talk about what can cause this for future reference along with how to fix it.

Can An Instant Pot Valve Fall Out?

While an instant pot float valve can come off the instant pot itself, it’s quite rare indeed. The float valve works by connecting a cap on the inside of the instant pot to the float valve, which comes out of the instant pot entirely. When pressure builds within the instant pot, the internal cap is pushed up and the float valve closes.

You will see the external section of the float valve be pushed up &#; it will likely be a small red or silver component.

There are two ways that a float valve could ‘fall out’. One way would be if just the internal cap of the float valve has come free of the instant pot, and is within the pot. This is dangerous for obvious reasons &#; nobody wants a small piece of silicone in their food.

Alternatively, that small piece of silicone could come out of the pot and end up in your garbage disposal, for example. That’s also a bad outcome.

Another way that a float valve could come out is if the entire valve (cap included) simply comes free of the machine. It is designed to come out so that you can clean it. The reason for this is that sometimes small pieces of food (such as rice or beans) can get stuck to or within the valve.

If this happens, the valve needs to be properly cleaned before it can be used again. At the end of the day, the valve is a safety feature, and it’s always worth taking great care of safety features.

What Can Cause An Instant Pot Valve To Fall Out?

Silicone Cap Gets Stuck

This can happen if you’ve been cooking something in your instant pot which has small parts within it. For example, a rice dish, or even porridge is at risk of this happening. If a small piece of food is trapped within the silicone cap on the inside of the instant pot, then the valve will start to function poorly.

If this poor functioning is allowed to continue, the pin of the valve may fall out, or even get pushed out, by small pieces of food or the inherent pressure in an instant pot.

Silicone Cap Gets Old

Whenever silicone is seen in a kitchen appliance, it is considered to be a serviceable part. This means that over time, any silicone parts may need to be replaced. This can be seen in instant pots as the silicone cap on the inside of the pot will age and start to become hard over time.

When it is hard, it will no longer block steam effectively, leading to the instant pot not functioning properly.

If the silicone cap gets sufficiently stiff, then it may simply fall off or break. This will lead to the pin of the valve coming loose, and potentially coming out of the lid.

Pin Becomes Misshapen

In very rare circumstances the pin portion of the float valve could become misshapen and therefore not work as it is supposed to. These cases are very rare as the metal pin is very resilient, but they are worth bearing in mind nonetheless.

The Float Valve Wasn’t Properly Replaced

To clean the float valve, as you should regularly, you must remove the internal silicone cap, and then pull out the metal pin. These two components make up the float valve and must be washed in hot soapy water before being replaced.

The problem with cleaning the float valve in this way is that it is quite easy to replace the components incorrectly. For example, you could replace the silicone cap upside down, which would result in the mechanism working incorrectly.

How Can I Fix An Instant Pot Valve That Has Fallen Out?

Clean The Valve

Making sure that the valve in your instant pot’s lid is completely clean will mean that it is much less likely to fall out at any point. If the mechanism itself is unobstructed by any food debris or liquid from cooking, then it will work much more efficiently.

Regularly removing the float valve from your instant pot and making sure that it is spotless will make sure that it works just as it should every time that you use it.

Replace The Valve

Over time, the components in the valve may become worn and, thusly, the valve will stop working. Both and valve pin and the silicone cap are serviceable, replaceable parts &#; simply get a new one and your instant pot will be working as it should!

While you could, in theory, replace just the pin or the silicone cap, we’d recommend actually replacing the entire valve all at once. A brand new valve will work much better than a new cap and an old pin, for example.

Furthermore, by replacing the entire valve you will, in essence, be pre-emptively replacing a serviceable part, saving yourself time and money.

Ensure The Valve Is Properly Assembled

The number one reason that your valve is most likely to fall out of the instant pot is that it has been assembled incorrectly. Whether by you or by someone else, it is an easy mistake to make!

If the valve falls out, make sure to get the lid off your pot, and take a close look at the valve and lid. Making sure that everything is completely clean (the best way to clean them is to wash them with hot, soapy water), first insert the pin. Insert the pin from the top of the lid, pushing it down into the lid itself.

When the pin emerges on the other side of the lid, place the silicone cap onto the pin, and the pin will be locked in place, ready for use. Make sure that the silicone cap can fit snugly against the silicone ring within the lid, as that is where the seal is made.

As we’ve said before: the valve is designed to be removable for cleaning, so if you do assemble it incorrectly, you can always take it off and try again.

Can I Get A Replacement Instant Pot Valve?

You certainly can! The instant pot valve is designed to be removed and cleaned at regular intervals. Because the parts that you’re removing are both small and of vital importance, Instant Pot makes sure to sell replacement parts.

When buying a replacement, ensure that you buy a full set of pin and cap, so that you can completely replace the entire valve all in one go. Replacing just the pin, for example, will be a little pointless if the silicone cap is going to fail in a couple of months.

Can I Still Use My Instant Pot If The Valve Falls Out?

Definitely not! The float valve is an integral part of the mechanism of your instant pot, you cannot use the pot again if the valve isn’t in it.

If the valve is replaceable and you can secure it back within the instant pot, then you’re good to go. Alternatively, you’re playing a dangerous game.

The float valve is pushed up by pressure building within the instant pot. When the valve is completely pushed up the lock on the lid is engaged, and your food cooks over time. This means that the float valve is an integral safety feature as if it isn’t in place, the seal won’t form, and the lid won’t lock.

If your instant pot’s float valve is missing, do not try to use it until you can get a new one.

Sours: https://mybudgetrecipes.com/what-to-do-if-your-instant-pot-float-valve-falls-out/

How Electric Pressure Cookers Work

An electric pressure cooker consists of three parts, the lid, inner pot and housing unit. The most important things to know about electric pressure cookers  are the safety valves and smart control box.

The Inner Pot

The inner pot is a removable cooking pot. It is generally made from aluminum or stainless steel. Instant Pot uses high quality stainless steel inner pots made with sturdy, three-ply, or copper-clad bottom for uniformed heating.

The Lid Lock

The lid has a gasket or sealing ring. When the lid is placed on the cooker in the sealed position, the lid and inner pot form an airtight chamber. The pressure inside this chamber increases when heat is applied to the inner pot. Operating the lid not locked in position with a significant amount of pressure generated is unsafe and not recommended. Instant Pot® models have float valves, a pin lock mechanism to prevent the lid from being accidentally opened while there is significant amount of pressure inside. If there is enough pressure inside the inner pot, the float valve is pushed up by the pressure. Once pushed up, the pin of the float valve serves as latch lock and prevents the lid from turning, even under force.

Instant Pot® also extends such safety assurance with a safety power switch. If the lid is not in the desired fully close position, the electronic control system detects the situation and will not switch on the power for heating.

Safety Valves

Similar to the conventional pressure cooker, the pin of the float valve can be self-destroyed by excessive temperature or pressure. The float valve without the pin becomes a pressure escape hole, and the pressure inside the chamber is released this hole. Although in such a case the float valve is permanently damaged and possible a lid replacement may be required, this is an effective last line of defense from the safety perspective. Instant Pot® employs the patented innovative push-down pressure release mechanism to release excessive pressure, even in the unlikely case where the pin of the float valve cannot destroyed. Instant Pot® provides a multi-level in-depth defense system to offer unprecedented safety assurance to the consumers.

Normally, the only way the pressure can escape is through a pressure release regulator valve on the lid. The pressure release valve has an anti-block shield inside the lid. If the pressure increases beyond the safe operating range, the pressure release regular valve will be pushed up, similar to that on the conventional pressure cooker, to release excessive pressure built up inside the chamber. The difference from the conventional pressure cooker is that the pressure release valve only kicks in to release excessive pressure due to possible failure of electronic based sensing circuitry.

Sours: https://instantpot.com/technology/how-electric-pressure-cookers-work/
  1. Weather forecast cleveland ohio
  2. 2019 chevy silverado accessories ebay
  3. Calm a mama sleep drops
  4. Yellow pages houses for rent
  5. Yamaha grizzly 550 oil capacity


The float valve is the red or silver pin in the lid of the Instant Pot.
There are different styles of float valves for different models
& sizes of Instant Pots. Here are what some of them look like:

It&#;s very important to pay attention to whether the float valve is in the
Up or Down position. It indicates whether your pot is pressurized or not.
-When UP the pot is PRESSURIZED.
-When DOWN the pot is NOT PRESSURIZED.


To see what your float valve looks like in both the Up & Down positions
press up on the float valve on the inside of the lid while looking at the
pin on the outside of the lid, then let it drop down. Some pins come
up further than others so it&#;s important to know what your specific one
looks like in both positions.


When pressure builds in the pot it pushes the float valve up.
There is a small silicone cap on the end of the float valve on the inside
of the lid. The cap holds the float valve on & also seals the hole shut
when the float valve rises, which stops the steam from coming out of it.
When the float valve rises it also engages the lid locking pin & the lid
will lock as a safety feature.

The float valve will drop down when the pressure drops & the lid will unlock.
At this point the lid will open easily.  NEVER FORCE THE LID OFF.

This page has excellent info on the different pressure release methods:

Occasionally food may stick to the float valve causing it to get stuck in the
UP position instead of dropping down when the pressure is released.

If you have turned the steam release handle to the Venting position &
steam is no longer coming out, but the float doesn&#;t drop down, it is
probably stuck. Wait a couple minutes & then gently tap the float valve
with the handle of a wooden spoon, chopstick, etc. and it should drop down.

Be sure to take the float valve out of the lid & wash it well if this happens.
It&#;s also a good idea to remove the float valve & wash it every once in awhile
to prevent it from getting gunked up & sticking.

-Remove the silicone cap off the end that&#;s inside the lid.
-Wash the float valve & the cap in warm soapy water.
-Put float valve back in the lid & attach the silicone cap.

On some models instead of getting a Burn Message the timer on
the pot will start counting down without the pot pressurizing.
If your pot does this it&#;s the equivalent of a Burn Message.

This page has info on what to do to resolve a BURN issue:

If your float valve doesn&#;t pop up it means the pot didn&#;t pressurize,
and there are several reasons this can happen. It could be recipe related
(like not enough thin liquid); operator error (like forgetting to put put
the steam release in the Sealing position); or it could just be that you
need to wait longer. Some things will take longer to pressurize, like
a full pot of soup.
This page goes over all the reasons:


~Click Image to PIN IT~

Like this:



Sours: https://instantpot3.wordpress.com//12/05/floatvalve/
Instant Pot Duo Nova Setup Guide for Beginners

Petersburg, to spend a vacation. If he sees me jerking off, then Im dead - I will no longer be able to look into his eyes. What if he will tell his parents everything.

Instant pot valve float

I began. To wave at her, trying to plant as deeply as possible on her tongue. The men laughed when they saw how bastard I was. And then the first one who fucked me in the mouth began to cum on my tongue. It seems that these men were not deprived of sex at all, so they needed a spectacle.

13 Reasons Why Your Instant Pot Won't Work or Pressurize - Problems: Float Valve, Sealing Ring

Liliana asked. Oh, no, whatever suits you, the guard replied. Well, can you show us your muscles, Vincy.

Similar news:

I also knew that he read all the mail of employees, logged into computers remotely and looked at who and what was doing. During working hours. But one day, one fine spring day, I lost my guard and relaxed.

1239 1240 1241 1242 1243